Four-Station Stabilized Plastic Thermoforming Machine

TTF-520AF as a four-station stabilized plastic thermoforming machine which contains forming,punching,cutting and staking into one line,driven by servo motor.Its heating tiles working together for the better use of work,with the help of the eccentric wheel,which is actually exist between station to station,its working process can be more steady and influent.Also,its positive and negaive pressure brings the model more comprehensive fit.
Motor control adjust chain width,so that you can change moulds. lower noise,high quality,high effeciency,high speed,there's no need to refuse such kind of machine. Great equipment of chiller,air tank and air compressor proves the best of the combination.

Parameters of Four-Station Stabilized Plastic Thermoforming Machine

Application of Four-Station Stabilized Plastic Thermoforming Machine:

Four-station stabilized plastic thermoforming machine for PVC, PET, PP, PS, etc, the machine furnace produce heat to soften the plastic sheet, then vacuum pump sucks the plastic sheet down to the forming mould area to finish the forming, different forming mould enable to have different forming shape. It can produce various food packaging products such as plastic cups, plastic boxes, plastic plates, plastic trays, plastic bowls, and so on.

What is features and advantages of our Four-Station Stabilized Plastic Thermoforming Machine?

1. Fully servo driven machine.no noise.no vibration,thermoforming good and fast.
2. Fully machine in compact structure,taking small floor space.
3. Can be adapted to a variety of materials,and the products thicker 8% than the average machine products.
4. Furnaces automatic removal device, can be turned down at any time during production without breaking the sheet reaching without wasting materials.
5.  Electric furnace temperature control system uses intelligent automatic compensation control,a control,a control of aregulator,easy to adjust the temperature uniformity,easy to use,simple,fast heating,low temperature three times up and down the oven roast slices.
6. Forming,cutting die servo-driven,two-way adjustable for upper and lower mold stroke,in which the upper mold electric adjustable in clamping direction. The upper and bwer molds height position can be adjusted conveniently and fast under the clamping state;lower mold in clamping direction readily accessible buffer,increasing the clamping speed,avoiding shock.
7. Auto cutting, auto counting,auto transmission by PLC.

Machine Details

Smart Control System

Heater

Forming Station

Punching Station

Stacking Station

Waste Recycling