How to operate a plastic thermoforming machine safely? What are the processes for operating a plastic thermoforming machine? Let's take a look with the plastic thermoforming machine manufacturer! In order to enable employees to use the plastic thermoforming machine well, ensure the smooth progress of production, protect the health and safety of employees, and ensure that the products can meet the quality standards in production, the following procedures are formulated:

1. Operating procedures
1. Turn on the air source switch, input compressed air, and the machine press plate will automatically retract. According to the size of the package and the actual packaging situation, adjust the air pressure to an appropriate pressure. The greater the air pressure, the faster the press plate presses down and the greater the pressure.
2. Connect the machine power supply to a 220V socket, turn on the machine circuit master, then place the bakelite mold on the turntable, and then connect the wires on the mold to the wiring post in the middle of the turntable.
3. Push the rotating plate counterclockwise to observe whether the automatic pressing of the pressing plate is normal. If there is no abnormality, you can put the blister cover paper on the bakelite mold to start trial packaging, turn on the heating switch, turn on the heating time system, adjust the current conversion system from small to large, and select the appropriate heating current gear, heating time system and cooling time system according to the actual mold size, and adjust them to satisfaction.
4. The operator puts the blister, the packaged material, and the cardboard into the bakelite mold in sequence, and rotates the mold table counterclockwise. The machine automatically completes the sealing of the package according to the debugged condition.
5. After the work is completed, turn off the main system and air source.
2. Safety precautions
1. Do not put your hands under the pressing plate during machine operation.
2. After the bakelite mold is powered on, its surface must be covered with a layer of thick cardboard to prevent the bakelite mold heating sheet from burning the machine's pressing plate elastic glue.
3. Operators must receive pre-job training and can only hold a job certificate after passing the training.
3. Maintenance and cleaning matters
1. Clean the machine body workbench once a day.
2. Refuel the pressure regulating valve oil mist once a week.
3. Grease the cylinder guide column once a week.
4. Perform a comprehensive maintenance on the plastic thermoforming machine once a year.
4. Records
"Machinery and Equipment Maintenance and Repair Records"
The above is the safety operating procedures of the plastic thermoforming machine introduced by the plastic thermoforming machine manufacturer.