Yogurt cup plastic positive and negative pressure forming machine

Picture Introduction

Advantage

1. Under the condition of stable voltage,the speed and strength of the upper mould moving by servo motor are the same,ensure the bottom of every forming cup has even thickness.(Instead of the traditional device controlled by cylinder,because the pressure moving the cylinder has high and low pressure,so the cylinder will move with different speed and power,then it can’t ensure the bottom of every forming cup has even thickness.)

2. Under the condition of stable voltage, Servo motor to feed the sheet precisely to avoid wasting sheet.

3. Large type oil pump motor(Shanghai, dedong 11kw) and oil pump(Joint Venture,SCENERY)。Ensure lower mould has enough movement speed and strong punching power, avoid the lower mould has slow movement speed and weak punching power because of the oil pump motor and oil pump are too small.

4. Inject lubricating oil automatically for rotating parts:

   Under the condition of no person operate the electric lubrication pump,it can inject lubricating oil automatically with the fixed time and fixed quantity,the turning parts of mechanized devices will get proper lubrication.(Instead of traditional manual inject lubricating oil,greatly avoid unnecessary destroy some machine parts because of people forget injection lubricant.

5. Cylinder control heating furnance to move,Once the circuit is interrupted suddenly, the cylinder will automatically push the electric furnace out, so as to avoid the continuous heating of the electric furnace causing the sheet to fall onto the heating tile and cause a fire