Products
Polystyrene Extruder
Model: TJ-750E
Sheet width (Max.): 750mm
The Range of Sheet Thickness: 0.3~1.8mm
Rated Power: 320KW
Screw Rod Diameter: 125mm
Suitable Materials: PP/PS
Send Inquiry
Product Introduction
Polystyrene Extruder
SAMPLE
APPLICATION AREA
The sheet extruder is composed of extrusion, calendaring, traction and sheet receiving. It extrudes PP/PS resin to PP/PS sheet rolls which can make jelly cups, ice cream cups, lids, containers and etc.
Main feature
1. Each roller is controlled separately by servo motor which is high quality
2. Sheet traction uses servo motor, saving more energy.
3.Heating way: Aluminum casted heater.
4. There are thermal couple on the heating to check if the temperature can reach the standard.
TECHNICAL PARAMETER of Polystyrene Extruder
| Model | TJ-750E |
| Maximum output | 400kg/h@0.7mm |
| Suitable Sheet | PP,PS |
| Sheet Width (Max.) | 750mm |
| Mould width | 950mm |
| Sheet Thickness | 0.3-2.0mm |
| Compressed air source pressure | 0.6-0.8Mpa |
| Screw Rod Dia | 125mm |
| Screw L/D Ratio | 35:1 |
| Max. Output | 400kg/hour |
| Rated Current | 500A |
| Rated Powe | 320kW |
| Energy consumption | 220kW |
| Main Motor Power | 160kw |
| Power Supply | AC 380V,50Hz, Three-phase, Four-wire |
| Dimension | L15388*W3615*H2900mm |
| Weight | About 12T |
Machine detail
Hot Tags: polystyrene extruder, China, suppliers, manufacturers, factory
You Might Also Like
Send Inquiry