Products
Plastic Disposable Plates Making Machine
Model: TTF-520A
Station：Three station
Max.Forming Area: 520*400mm
Max.Forming Height: 110mm
Sheet thickness：0.2-1.6mm
Forming Speed (Max.): 30times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.
Send Inquiry
Product Introduction
Plastic Disposable Plates Making Machine---Product Description: Machine is applicable to the production of plastic different material, such as PS, PP, PVC, PET and ABS products, such as cups, lids, bowls, contaienrs and so on. Machine adopts hydraulic system, built-in lubricating system, not oil leak. Machine's rotary arm is formed by one-off integrated forge, high operational efficiency, small noise, small vibration and stable operation.engineered with fully servo-driven systems to ensure stable high-speed operation, accurate forming and cutting, reduced material waste, and consistent production quality.
Plastic Disposable Plates Making Machine---Technical Parameters
Model | TTF-520A |
Station | Three station |
Mould Size (Max.) | 520*400mm |
Forming Depth (Max.) | 110mm |
Sheet thickness | 0.2-2mm |
Forming Speed (Max.) | 40times/min |
Air pressure | 0.6-0.8mpa |
Air consumption | 3.0 m³/min |
Water consumption | 0.7m³/h |
Sheet width (Max.) | 550mm |
Suitable Sheet | PP, PS, HIPS, PET, PVC, PLA etc. |
Power supply | AC 380V, 50Hz, Three-phase, Four-wire |
Rated power | 120Kw |
Heating power | 75Kw |
Procedure | Forming-cutting-stacking |
Dimension | L9300*W4200*H2800mm |
Weight | About 9.0T |
FEATURES AND ADVANTAGES
- High degree of standardization, complete functions, safe, efficient, energy-saving and hygienic.
- It integrates mechanical, pneumatic and electrical integration, and is controlled by microcomputer and programmable controller (PLC).
- Easy-to-operate human-machine interface, and has the function of remote connection.
- Electric lifting, double-station large-diameter unwinding, allowing a single person to load coils weighing up to 600KG.
- Servo feeding, stepless adjustment of sheet length, high speed, accuracy and stability.
- The quick mold change system can conveniently, quickly, accurately and safely change molds, reduce machine downtime, reduce labor waste, and improve production efficiency.
- The mold opening and closing of the forming, punching and cutting stations are controlled by servo motors, with high precision, low wear, fast speed and low noise. Each station is supported by four columns, combined with a five-point structural connecting rod, which has good stability.
- The unique vertical stacking concept ensures continuous stacking of products.
- Automatic counting of finished product output, with production data memory function, can store 90 sets of operating data.
- Combined with the edge material winding device, the entire production process is clean, without burrs and waste.
Plastic Disposable Plates Making Machine---Samples:
Hot Tags: plastic disposable plates making machine, China, suppliers, manufacturers, factory
You Might Also Like
Send Inquiry