Coffee Cup Lid Thermoforming Machine

Model: TTF-700A
Max.Forming Area: 700*550 mm
Max.Forming Height: 120mm
Sheet thickness：0.2-1.6mm
Forming Speed (Max.): 30times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.

Send Inquiry

Product Introduction

TTF-700AF is a fully automatic plastic theremofroming machine which integrated sheet loading, sheet convey, heating, forming, cutting, punching, stacking and rewinding. becuase of the fully automatic which brings high speed, more efficiency, lower human resouce cost. Coffee cup lid thermoforming machine is used to producing different kinds plastic lids, cups, trays, food box, biscuit box packing and etc. Suitable material is PP/PS/PET/PVC/HIPS.

The working theory is a combination of pastive and negative pressure with assiting strenthing in mould by some nylon plugs. Which makes it have more powerful ability of making products. So it brings wider application just like big deep and more complicated bottom. TTF-700AF is driven by full servo motor, which is more precise, more efficient, lower noise, longer machine using time.

guangao

Technical Parameter of Coffee Cup Lid Thermoforming Machine

Model	TTF-700AF
Station	Four station
Mould Size (Max.)	700*600 mm
Forming Depth (Max.)	120mm
Sheet thickness	0.2-2mm
Forming Speed (Max.)	35times/min
Air pressure	0.6-0.8mpa
Air consumption	3.6m³/min
Water consumption	0.7m³/h
Sheet width (Max.)	730mm
Suitable Sheet	PP, PS, HIPS, PET, PVC, PLA etc.
Power supply	AC 380V, 50Hz, Three-phase, Four-wire
Rated power	211Kw
Heating power	118Kw
Procedure	Forming-punching-cutting-stacking
Dimension	L13000W4500H2800mm
Weight	About 25.0T

Features And Advantages of Coffee Cup Lid Thermoforming Machine

1. High degree of standardization, complete functions, safe, efficient, energy-saving and hygienic.
2. It integrates mechanical, pneumatic and electrical integration, and is controlled by microcomputer and programmable controller (PLC).
3. Easy-to-operate human-machine interface, and has the function of remote connection.
4. Electric lifting, double-station large-diameter unwinding, allowing a single person to load coils weighing up to 600KG.
5. Servo feeding, stepless adjustment of sheet length, high speed, accuracy and stability.
6. The quick mold change system can conveniently, quickly, accurately and safely change molds, reduce machine downtime, reduce labor waste, and improve production efficiency.
7. The mold opening and closing of the forming, punching and cutting stations are controlled by servo motors, with high precision, low wear, fast speed and low noise. Each station is supported by four columns, combined with a five-point structural connecting rod, which has good stability.
8. The unique vertical stacking concept ensures continuous stacking of products.
9. Automatic counting of finished product output, with production data memory function, can store 90 sets of operating data.
10. Combined with the edge material winding device, the entire production process is clean, without burrs and waste.