Full Automatic Water Cup Making Machine

TQC-750 plastic thermoforming machine(full automatic plastic cup making machine) adopt servo motor for sheet feeding and streching, PLC for programe, touch screen for operation, stable, low noise and high efficiency.  Suitable for producing plastic cups, fruit containers, bowls, trays, fast food boxes and etc.

Advantages of Full Automatic Water Cup Making Machine

1.The stretching of plug inside of up mould is controlled by servo motor.

2.The operation controller --adopts hanging type screen,ues Siemens,Germany ,technology.System working much more stable.

4. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air.

5.Temperature control modules to control each temperature area.

Finished Products---Full Automatic Water Cup Making Machine:

Parameters of Full Automatic Water Cup Making Machine

FAQ

1. Can this machine produce Biodegradable (PLA) cups?

Yes, absolutely. PLA material is sensitive to temperature. The TQC-750S features German Heaters with Segment Control, allowing for precise temperature management to form PLA sheets perfectly without melting or deforming them.

2. What is the actual production capacity?

The machine runs at a maximum speed of 42 cycles per minute. Your total output depends on the mold layout (cavities). For example, if you use a 32-cavity mold for small water cups, the output would be 32 x 42 = 1,344 cups per minute.

3. How does the control system work?

The machine uses a Micro PLC system combined with a Man-Machine Interface (touchscreen). This allows the entire operation-from material feeding to cutting-to be automated and easily monitored by a single operator.