Thermoforming Cup Making Machine

Thermoforming Cup Making Machine is used to produce disposable drinking cups, ice-cream cups, bowl for yogurt, lids, dishes, plates and etc.This machine is our hot selling products.We export to over 70 countries , widely praised by our customers,we own advanced technology and reliable after-sales service. 

This machine is four pillars design,that makes the machine are able to get more big forming area ,more output and also with adopt Servo motor feeding,stretching  and PLC control system,temperature control system,and with energy saving heater can save energy .It can produce various kind of disposable plastic cup,plastic containers of cooling  drinks,sour milk,ice-cream,fast food or install noodle,as well as different kinds of packages for hardware ,medicines....

The TQC-650B is a versatile Plastic Thermoforming Machine for PP, PS, HIPS, PET, PVC, PLA etc. Fully automatic PLC control for making cups, bowls, and lids. Speed: 35 cycles/min.

Production Procedures:

Thermoforming Cup Making Machine Technical Parameters

Advantages of Our Thermoforming Cup Making Machine

1. Auto-Makes Cups Fast

This machine can produce 400 to 600 cups of coffee per hour, so an operator can produce 3,200 to 4,800 cups of coffee a day.

2. Works With Paper & Plastic

It takes 20 minutes to switch between materials - just switch the raw materials and adjust some Settings.

3. Makes Sturdy, Leak-Proof Cups

It uses precise folding (for paper) or molding (for plastic) to create a tight seal, so the cup won't drip or collapse when it's full.

4. Easy To Use

The control is very simple: Select your cup size from the panel (for example, 250 milliliters of coffee), fill it with a paper roll or plastic pellets, and then press "Start".

Samples

FAQ

Can this machine produce Biodegradable (PLA) cups?

Yes, absolutely. PLA material is sensitive to temperature. The TQC-750S features German Heaters with Segment Control, allowing for precise temperature management to form PLA sheets perfectly without melting or deforming them.

What is the actual production capacity?

The machine runs at a maximum speed of 42 cycles per minute. Your total output depends on the mold layout (cavities). For example, if you use a 32-cavity mold for small water cups, the output would be 32 x 42 = 1,344 cups per minute.

How does the control system work?

The machine uses a Micro PLC system combined with a Man-Machine Interface (touchscreen). This allows the entire operation-from material feeding to cutting-to be automated and easily monitored by a single operator.