semi automatic Vacuum Formed Plastic Tray Making Machine

A P P L I CAT I ON : This machine finished products are widely used in sealing and packing toys, hardware, cosmetics, electronic products (batteries, electronic components and so on), foodstuff (fruit pallets, snack boxes, biscuit boxes, food dishes, trays, etc), medicines, etc. It is suitable...

Send Inquiry

Product Introduction

SPECIFICATION:

Computerized Vacuum Forming Machine

1.In mould cutting.
2.in line stacking.
3.Low energy consumption
4.Contact multi-zone

APPLICATION:

1.This machine finished products are widely used in sealing and packing toys, hardware, cosmetics, electronic products (batteries, electronic components and so on), foodstuff (fruit pallets, snack boxes, biscuit boxes, food dishes, trays, etc), medicines, etc.

2. It is suitable for plastic sheet: PVC, PE, PET, PP, PS, HIPS.

SAMPLES

TECHNICAL PARAMETER
Model	TX-720C
Forming Size	W: 420-720mm L: 760-1220mm
Cooling System	Blower2 Sprayer10
Vacuum Pump	100㎥/hr (4hp)
Rated Power	40kw
Working Speed	200-600 times/hour
Power Supply	AC, 380V/50Hz, Three phrases, Four wires
Dimension	L6500xW1300xH2500mm
Weight	About 2.5T

Main Features

① Using microcomputer touch screen man-machine interface control system, the operation is intuitive and easy to operate, convenient and easy maintenance.
② Frequency conversion motor control feeding, fast, accurate and steady.
③ Heating furnace temperature control module, display the temperature degree directly, accurately detect the temperature of each piece of heating.
④ Automatic alarm function, truly electrical-mechanical integration.
⑤ Electric furnace adopt stainless steel, heat preservation cotton sealing structure, effectively prevent heat loss.

QQ截图20180303103509.png

AUXILIARY EQUIPMENT
Chiller 5F
Purpose: Cooling mould, track, and hydraulic system when forming, Refrigerant: R22 Cooling Fan: 0.18kw*2 Volume of water tank: 80L Rated power: 3.7 kw Power supply :3PH-380V/50Hz Dimension:L1250xW750xH1330mm Weight: about 175kg
Air compressor screw type TK-3.6
Purpose: for getting more air when forming Working pressure: 0.8mpa Air displacement: 3.6m³/min Motor power: 22kw Power supply: 3PH-380V/50Hz Dimension: L1150xW900xH1350mm Weight: about 580kg
Air tank
Volume:1.0m³ Pressure:0.8Mpa Design temperature:150℃ Total height:2400mm Inner diameter:800mm Relief valve interface:Rp11/2 Drain valve interface: R 1/2
Hydraulic cutting machine
Max. working pressure: 25T Max. working stroke：0-90mm Workable area：600*1600mm Motor power： 2.2kw Power supply :3PH-380V/50Hz Dimension:L1856xW895xH1770mm Weight : about 1.0T