Plastic Takeout Pizza Tray Making Machine

Model: TTF-520AF
Station：Four station
Max.Forming Area: 520*400mm
Max.Forming Height: 110mm
Sheet thickness：0.2-2mm
Forming Speed (Max.):40times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.

Send Inquiry

Product Introduction

Plastic takeout pizza tray making machine is suitable to form HIPS,PS,PP,PVC,PET,ABS sheet that can produce bxes, trays,bowls,fast-food boxes,dishes and lids etc.The whole system is controlled by micro PLC and operated by the man-machine interface.It combines the feeding,heating,forming,cutting and stacking into one process.

Main Functions:

Forming mold presses first and then stretches. The mold cooling method is water cycle in mold and there is mold controlling system, therefore it can meet different mold temperatures requirements of different plastic sheet.Forming and cutting joint has installed the precision roller bearing, so the machine has the advantage of high impact strength, flexibility, durability and resistance to fatigue, ensuring the precision and sensitivity of forming and cutting.

Parameters of Plastic Takeout Pizza Tray Making Machine:

Model	TTF-520AF
Station	Four station
Mould Size (Max.)	520*400mm
Forming Depth (Max.)	110mm
Sheet thickness	0.2-2mm
Forming Speed (Max.)	40times/min
Air pressure	0.6-0.8mpa
Air consumption	3.0 m³/min
Water consumption	0.7m³/h
Sheet width (Max.)	550mm
Suitable Sheet	PP, PS, HIPS, PET, PVC, PLA etc.
Power supply	AC 380V, 50Hz, Three-phase, Four-wire
Rated power	136Kw
Heating power	75Kw
Procedure	Forming-punching-cutting-stacking
Dimension	L10800W4200H2800mm
Weight	About 11.0T

Finished Samples:

A Plastic Takeout Pizza Tray Making Machine is widely used in the processing of PP, PE, PVC, PS, PET, and other plastic sheets. It can produce various food packaging products such as plastic cups, plastic boxes, plastic plates, plastic trays, plastic bowls, and so on.

Key Features of the Plastic Takeout Pizza Tray Making Machine

Maximum Mold Dimensions: 520*400mm, allowing the production of a variety of thermoforming products.
Cycle Speed: Up to 45 cycles per minute, ensuring fast and consistent output.
Maximum Sheet Width: 550 mm, enabling the use of larger thermoforming plastic sheets.
Material Compatibility: PET, CPET, PP, PVC, PS, OPS, PLA, with a maximum sheet thickness of 2mm.
Advanced In-Mould Cutting Technology：The in-mould cutting feature ensures precise shaping and trimming of products directly within the mold.