Plastic Lunch Container Making Machine

Model: TTF-520A
Station：Three station
Max.Forming Area: 520*400mm
Max.Forming Height: 110mm
Sheet thickness：0.2-2mm
Forming Speed (Max.): 30times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.

Send Inquiry

Product Introduction

Plastic Lunch Container Making Machine are mainly produce upscale plastic containers like bowls,square boxes,lids,trays,etc. It is suitable for PP,PS,OPS,PVC,PETand PLA material. Have three stations:Thermoforming-cutting-Stacking. All movements driven by servo motor. Feeding,forming,cutting and stacking processing are compete production automatically. Mould with rapid change device,easy maintenance. Forming with 6bar air pressure and vacuum. Maximum speed 40 cycles per minutes.

Plastic Lunch Container Making Machine---Main Technical Parameter:

Model	TTF-520A
Station	Three station
Mould Size (Max.)	520*400mm
Forming Depth (Max.)	110mm
Sheet thickness	0.2-2mm
Forming Speed (Max.)	40times/min
Air pressure	0.6-0.8mpa
Air consumption	3.0 m³/min
Water consumption	0.7m³/h
Sheet width (Max.)	550mm
Suitable Sheet	PP, PS, HIPS, PET, PVC, PLA etc.
Power supply	AC 380V, 50Hz, Three-phase, Four-wire
Rated power	120Kw
Heating power	75Kw
Procedure	Forming-cutting-stacking
Dimension	L9300W4200H2800mm
Weight	About 9.0T

Plastic Lunch Container Making Machine---Sample:

It is suitable for processing different materials, such as PP, PS, HIPS, PET, PVC, PLA etc. processing high transparency, high stretch, shallow stretch, round, square, upper and lower two-way stretch, flanged and other products, including trays, lids, fruit and vegetable boxes, flower pots, shells, seedling trays and plates, etc.