Full Automatic Plastic Flower Pot Thermoforming Machine

Model: TTF-520AF
Station：Four station
Max.Forming Area: 520*400mm
Max.Forming Height: 110mm
Sheet thickness：0.2-1.6mm
Forming Speed (Max.): 30times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.

Send Inquiry

Product Introduction

Full automatic plastic flower pot thermoforming machine is used to producing different kinds sushi trays, soap trays, egg trays, seeding pot tray, flower pot and etc. The machine is totally driven by servo motor.

Thermoforming Machine Working Principle:

Plastic thermoforming (blister) technology is a plastic processing technology that processes thermoplastic sheets (plates) into various products. First, the plastic sheet (plate) is heated to a softened state in a heating furnace, and then placed in a forming mold, and under the action of external force (vacuum, positive pressure, or mechanical), it is tightly attached to the surface of the mold to form a and detailed contours of the fit surface. After cooling, shaping, trimming, and other processes, the desired product is obtained.

product-750-655

Full Automatic Plastic Flower Pot Thermoforming Machine of Technical Parameter:

Model	TTF-520AF	TTF-520A
Station	Four station	Three station
Mould Size (Max.)	520*400mm
Forming Depth (Max.)	110mm
Sheet thickness	0.2-1.6mm
Forming Speed (Max.)	30times/min
Air pressure	0.6-0.8mpa
Air consumption	3.0m³/min
Water consumption	0.7m³/h
Sheet width (Max.)	550mm
Suitable Sheet	PP, PS, HIPS, PET, PVC, PLA etc.
Power supply	AC 380V, 50Hz, Three-phase, Four-wire
Rated power	136Kw	120Kw
Heating power	75Kw	75Kw
Procedure	Forming-punching-cutting-stacking
Dimension	L10800W4650H2670mm	L8200W4650H2670mm
Weight	About 11.0T	About 9.0T