Products
Auto Egg Tray Forming Machine
Model: TTF-520A
Station：Three station
Max.Forming Area: 520*400mm
Max.Forming Height: 110mm
Sheet thickness：0.2-1.6mm
Forming Speed (Max.): 30times/min
Power supply: AC 380V, 50Hz, Three-phase, Four-wire
Application: trays, containers, boxes, lids, etc.
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Gear, Pump
Suitable Material: PP, PS, HIPS, PET, PVC, PLA etc.
TTF series Auto Egg Tray Forming Machine is forming, punching,cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency.
Fully automatic forming and cutting machine integrates forming, cutting and stacking at the same time. It has the features of saving labor, improving efficient, lowing labor intensity and reducing production cost. It adopts PLC controller and touch screen to control the working program. Two workers are enough for whole production line.
The machine is Auto Egg Tray Forming Machine in one step with following process: transporting sheet, heating, forming, cutting, stacking and winding waste edge.
It is suitable for processing different materials, such as PP, PS, HIPS, PET, PVC, PLA etc. processing high transparency, high stretch, shallow stretch, round, square, upper and lower two-way stretch, flanged and other products, including trays, lids, fruit and vegetable boxes, flower pots, shells, seedling trays and plates, etc.
Application of Auto Egg Tray Forming Machine:
Auto egg tray forming machine is used to producing 6pcs/12pcs/18pcs/30pcs eggs tray and other disposable products such as biscuit box, food container, soap tray, PET fruit container and etc. The machine is completely driven by servo motor. Touch screen, PLC and servo motor use Delta brand. Heater uses Elstein from Germany.
Parameter of Auto Egg Tray Forming Machine:
| Model | TTF-520A |
| Station | Three station |
| Mould Size (Max.) | 520*400mm |
| Forming Depth (Max.) | 110mm |
| Sheet thickness | 0.2-2mm |
| Forming Speed (Max.) | 40times/min |
| Air pressure | 0.6-0.8mpa |
| Air consumption | 3.0 m³/min |
| Water consumption | 0.7m³/h |
| Sheet width (Max.) | 550mm |
| Suitable Sheet | PP, PS, HIPS, PET, PVC, PLA etc. |
| Power supply | AC 380V, 50Hz, Three-phase, Four-wire |
| Rated power | 120Kw |
| Heating power | 75Kw |
| Procedure | Forming-cutting-stacking |
| Dimension | L9300*W4200*H2800mm |
| Weight | About 9.0T |
Key Features of the Thermoforming Machine
1. Maximum Mold Dimensions: 520 x 400 mm, allowing the production of a variety of thermoforming products
2. Cycle Speed: Up to 75 cycles per minute, ensuring fast and consistent output
3. Maximum Sheet Width: 550 mm, enabling the use of larger thermoforming plastic sheets
4. Material Compatibility: PET, CPET, PP, PVC, PS, OPS, PLA, with a maximum sheet thickness of 2mm.
5. Advanced In-Mould Cutting Technology：The in-mould cutting feature ensures precise shaping and trimming of products directly within the mold.
Sample:
Hot Tags: auto egg tray forming machine, China, suppliers, manufacturers, factory
You Might Also Like
Send Inquiry