Cup machine packaging is a number of common problems to deal with

- Dec 27, 2017 -

The packaging process of cup-making machine includes the main processes of filling, wrapping and sealing, as well as its related processes, such as cleaning, stacking and disassembly. In addition, the cup-making machine packaging also includes metering or stamping on the packaging and other processes. The use of mechanical packaging products can increase productivity, reduce labor intensity, adapt to the needs of large-scale production, and meet the requirements of clean sanitation. The packaging machinery of cup making machine has many kinds of classification methods. According to function can be divided into single function packaging machine and multi-functional packaging machine, according to the use of the purpose can be divided into packaging machines and outsourcing machine, according to the packaging varieties can be divided into special packaging machine and general packaging machine, according to the level of automation into semi-automatic and fully automatic machine.

Here are some customer questions:

First, some customers will ask the shrinking machine temperature slow or can not rise to the higher temperatures (above 160 degrees Celsius) what is the reason?

A: The heater line is the main power cord through a magnetic-absorbing switch to the electric tube, so the first detection of the magnetic flux switch contacts are normal. If the line does not pass one phase, the above phenomenon will occur. If the magnetic flux switch is normal, then check the meter to see if each phase is the same as the Ohm value of the machine. If normal should be short circuit. If all phases are connected but the line or electric heat pipe is still abnormal, the heater needs to be replaced.

Second, there are some problems are the equipment at work when the film is easy to offset and can not normal feeding how to adjust?

A: In the equipment such as the film material migration, the adjustment of film volume position and tension balance rod are invalid, you can adjust the angle of the upper triangular plate to solve this problem. If the upper membrane material deviates from the clamping chain, the upper triangular plate can be adjusted to the clockwise direction, the following layer film material deviates from the clamping chain, and the upper triangular plate can be adjusted counterclockwise.

Third, if the cup-making machine packaging 6 bottles of cluster packaging, the eye can not detect packaging, machine work easily cut to the packaging, how to deal with?

A: Cluster packaging of the gap between the bottles will affect the detection of the electric eye, at this point can be a horizontal electric eye detection angle adjustment to bevel. After the adjustment can reduce the magic eye detection of the packaging gap in the probability, so as to avoid the phenomenon of disorderly cut in the work.


  • Coffee Cup Making Machine
  • Egg Box Thermoforming Machine
  • Fruit Box Thermoforming Machine
  • Pet Food Box Production Line
  • Electronic Products Packing Box Forming Machine
  • PP PS Sheet Line

Related Products